parts oaf the new mass flow controller flox[on] B

The new flox[on] B



floxonB the new generation

The new flox[on] B represents a new generation of mass flow controller developed by FC Technik. It is based on the proved and well tested technique of thermal mass flow controller and a gas flow regulation made by a pressure compensated proportional valve which is insensitive to incoming pressure (0-16 bar) as well as outflow pressure. In addition it has a new and economical design, an optimized high performance micro controller, a micro USB port that allows to operate the flox[on] with a PC and can be choosed in three different modifications.

The USB Port

The new USB Port allows to connect the flox[on]B with a PC. In addition with the flox[on] software for windows it is possible
• to get all information about the device,
• to see and to manipulate the calibration data,
• to have a look at the actual operation and to overwrite the set point.

Available modifications

Three standard versions of the flox[on]B are available:
The economic version is useful for standard applications with gases like compressed air, nitrogen or argon.
The extended version is ready to handle gases like hydrogen, methane and oxygen.
The stainless steel version, free of brass components, can be used in applications like food industry.


flox[on] B economy.

Maximum flowNl/min200
Minimum flowNl/min0.5
Maximum operating bar16
Regualtion ratio1 : 30
Accuracy± 1% f.s.
Step response s1.5
Operating temperature°Cfrom -10 to +60

process media gases are:
comp. air, N2, Ar, CO2

HousingAluminium and Brass
ValvepartsBrass
Inlet / OutletportFBSPP 1/2“
SealingNBR, FPM
ProtectionIP54

flox[on] B extended

Maximum flowNl/min250
Minimum flowNl/min0.5
Maximum operating bar16
Regualtion ratio1 : 50
Accuracy± 1% f.s.
Step response s1.5
Operating temperature°Cfrom -10 to +60

process media gases are:
comp. air, N2, Ar, CO2 ,H2, CH4, O2

HousingAluminium and Brass
ValvepartsBrass
Inlet / OutletportFBSPP 1/2“
SealingNBR, FPM
ProtectionIP65

flox[on] B stainless steel

Maximum flowNl/min250
Minimum flowNl/min0.5
Maximum operating bar16
Regualtion ratio1 : 50
Accuracy± 1% f.s.
Step response s1.5
Operating temperature°Cfrom -10 to +60

process media gases are:
comp. air, N2, Ar, CO2 ,H2, CH4, O2

Housingsteel X2CrNi18-9, 1.4307 and
steel X2CrNiMo17-12-2, 1.4404
Valvepartssteel X2CrNi18-9, 14307
Inlet / OutletportFBSPP 1/2“, 3/8“, 1/4“
SealingNBR, FPM, other
ProtectionIP65

 

floxonb_small

flox[on] B