flox[on] J for huge gas flow up to 5000 Nl/min
The measurement of the flox[on] J mass flow controller for hugh gas flow is temperature and pressure compensated with a very high control accuracy in the lower and upper flow ranges. The adjustment control of the mass flow controller uses a pressure compensated proportional valve of the most recent design, which makes it unsusceptible to pressure fluctuations in the in- and outlet. The flox[on] J mass flow controller is equipped with a high-performance micro-controller. This guarantees an unusually quick and dynamic regulation.
Application
Especially the flox[on] J mass flow controller was developed for controlling hugh gas flows up to 5000 Nl/min.It is often used in the steel and NE-heavy industry.
It is suitable for all noncorrosive gases like, air, nitrogen, argon or hydrogen.
![flox[on] J](http://www.fc-technik.com/wordpress/wp-content/uploads/J_CAD_neu-271x300.jpg)
The new flox[on] J for high flow rates
Instead of the trademark flox[on] you can of course call our mass flow controller floxon too.
Download data sheet flox[on] J here
Data operation flox[on] J
| Maximum flow | Nlmin-1 | 5000 |
| Minimum flow | Nlmin-1 | 30 |
| Maximum operating pressure | bar | 16 |
| Regualtion ratio | 1 : 50/100 | |
| Accuracy | ± 1% | |
| Step response (10% - 90%) | s | 7 or less |
| Operating temperature | °C | from -10 to +60 |
flox[on] J Electrical Equipment
| Connection voltage | V DC | 24 ± 15 % |
| Capacity max. | W | 20 |
| Connection analog | set and real value | |
| Bypass Signal | V DC | 24 |