FC Technik thermal mass flow controller
lateral cut of an FC Technik mass flow controller
The flox[on] mass flow controller was especially developed for use in heavy industry. The unique robustness and operational dependability of the design ensure maintenance-free operation and user-friendly controls with a maximum of load-bearing reserve. The mass flow controller is a combination of a mass flow sensor and a control valve.
The measurement of the flox[on] mass flow controller is temperature and pressure compensated with a very high control accuracy in the lower and upper flow ranges.
The adjustment control of the flox[on] mass flow controller uses a pressure compensated proportional valve of the most recent design, which makes it unsusceptible to pressure fluctuations in the in- and outlet.
The flox[on] mass flow controller is equipped with a high-performance micro-controller. This guarantees an unusually quick and dynamic regulation.
Temperature sensor and heating element
Open measuring cell with bypass
Selenoid
Measurement principle
The flow is regulated by a pressure compensated proportional valve which is insensitive to incoming pressure (0-16 bar) as well as outflow pressure.
The valve is controlled by a solenoid and can be opened fully under any pressure conditions.
Regulation principle
The flow is regulated by a pressure compensated proportional valve which is insensitive to incoming pressure (0-16 bar) as well as outflow pressure.
The valve is controlled by a solenoid and can be opened fully under any pressure conditions.